In some areas with harsh environments, the fiber optic cable temperature should be as low as possible. At the same time, these areas, especially in summer, should also pay attention to the heat dissipation of fiber optic cables. Fiber optic cables are usually in the form of multicore structures. There are certain guidelines for fiber optic cable manufacturer that Chinese companies follow as they do.
Therefore, it can be processed into different forms to meet the needs of different environments. For fiber optic cable, the most important factor is the material used to make the fiber optic cable. Different regions use different fiber optic materials.
For example, fiber optic cables used in cold areas often use polyester. (PET) and Polyvinyl Chloride (Polyvinyl Chloride) tubing.
This is because PVC pipe is not only cheaper and has excellent corrosion resistance, but polyethylene pipe is more economical and has excellent corrosion resistance.
However, special treatment is required to meet the demand of PVC pipe in some areas.
In addition, under certain conditions, the use of PVC pipe must meet the performance requirements of PVC pipe and other pipe materials O-pf Company.
4. To replace ADSS fiber optic cable, it is usually necessary to replace all cores and claddings.
For ADSS fiber optic cable, we can connect the fiber directly to indoor or outdoor and then the fiber directly to ADSS fiber optic cable. We have several rules for ADSS Cable manufacturer which we have to follow. It is a company rules.
When the fiber optic cable is laid, it is usually laid at both ends of the fiber optic cable and installed with cable poles or pull cables. The special fiber optic cable sleeve should be used to install the fiber optic cable trunk, the main fiber optic cable and the splice box at both ends of the cable should be passed through and the corresponding connection terminal box should be installed.
Each fiber can use a special coating. The main optical cable usually uses coreless optical fiber as the outer sheath, and the outer sheath uses polyamide coated outer sheath, and the outer sheath uses non-insulating materials or elastic composite materials.
The outer jacket is made of polyamide insulating material. (like PVC) with good elasticity, cold resistance and aging resistance.
Outdoor applications should use coreless optical fiber as a protective layer between the trunk cable and the outer jacket.
The outer jacket of the optical fiber cable should use high-strength polyamide epoxy plastic or high-elastic polyolefin material as the protective layer between the outer jacket or the optical fiber cable and the main cable. (Like PVC).
Post by Pranta Saha CEO at Tizen